ONO 3D offering is now closed and is no longer accepting investments.

INVEST IN ONO 3D TODAY!

$99 Smartphone 3D Printer

This Reg CF offering is made available through StartEngine Capital, LLC. This investment is speculative, illiquid, and involves a high degree of risk, including the possible loss of your entire investment.
ONO 3D

$42,825.00 Raised

REASONS TO INVEST

ABOUT

HEADQUARTERS

1355 Market Street Suite 488
San Francisco, CA 94103-1314
VALUATION

$30M

TEAM

Filippo Moroni
Filippo Moroni
Co-Founder, CTO, Director

Filippo Moroni’s 15 years of experience in 3D printing and industrial design have culminated in ONO. He is the inventor and designer of the ONO printer and many of the technologies that made it possible. He founded and ran Solido3D, a premier Italian prototyping company that has completed over 1200 projects ranging from Hollywood movie props to scale prototypes of new vehicles. With Pietro Gabriele, he co-founded Fonderie Digitali, a network of high-tech Italian companies specialized in different areas that work together to create innovative solutions. He’s taught classes in 3D printing and design in art and architecture at Universities worldwide. Filippo has received many international awards, for achievements in design, entrepreneurship and marketing. He has been involved in many startups, from industrial automation to small robotics, from web services to everyday consumer electronics. ONO is Filippo's primary job, where he leads: Mechanical Design, Electrical Engineering, Facility Automation, Product QC, and Public Events. Filippo has also been working as CTO of Fonderie Digitali S.r.l. since 2013 and as CEO of Solido3D S.r.l. since 2015.

Pietro Gabriele
Pietro Gabriele
Co-Founder, CEO, President, & Director

Pietro Gabriele handles the business side of ONO, following his years of developing successful enterprises, including general contracting, civil constructions, and even a jazz club. Pietro has spearheaded the task of bringing Fonderie Digitali to the forefront of Italian innovation, raising Government Funds to centralize the network and startups to for an agritech research project focused on hydroponics and aeroponics. Pietro brings his experience in collaboration, coordinating funding, and developing projects from partnerships with the most innovative minds in the EU. ONO is Pietro’s primary job, where he dedicates at least 60 hours each week. At ONO, Pietro leads: Business Development, Strategic Marketing, Contracting & Acquisition, and International Business. Pietro has also been working as CEO of Fonderie Digitali S.r.l. since 2013, as COO of Solido3D S.r.l. since 2015, and as CEO of I.C.R.A. Gorizia, S.r.l. since 1996.

Giacomo Fornasini

Giacomo Fornasini

General Manager

Giacomo Fornasini is the general manager of ONO, running the day-to day operations and helping the founders with everything from presentations to logistics. He studied mechanical engineering along with entrepreneurship and project management at the University of Maryland. After completing a Masters degree with a focus on design for 3D printing, he joined up with the team just before the first unveiling of the printer in 2015. At ONO, Giacomo leads: Brand Communication, Strategic Events, Web & Social Communication, and US Investors.

Lorenzo Antonucci

Lorenzo Antonucci

Designer

3D modeling, graphic design, packaging, and creative design. Part of the Solido3D Team dedicated to ONO from February 2016 to Present.

Tommaso Bertolini

Tommaso Bertolini

Tester

Testing, troubleshooting, and preparing feedback on printer and app functionality. Part of the Solido3D Team dedicated to ONO from May 2016 to Present.

Michela Gioffre

Michela Gioffre

Chemical Researcher

Researching new chemical compositions of resins as well as managing the assessment of resins for import into international countries. Part of the Solido3D Team dedicated to ONO from May 2016 to September 2017.

Anna Legge

Anna Legge

Office Manager

Coordinating employees, organizing files and documents, travel organization including flights, accommodation, and visa requirements, and scheduling appointments. Part of the Solido3D Team dedicated to ONO from October 2016 to Present.

Gianluca Poma

Gianluca Poma

Logistics Engineer

Setting up international logistics, the layout of the production line and facility in Shenzhen, and organizing the warehouse. Part of the Solido3D Team dedicated to ONO from December 2015 to March 2018.

Salvatore Tassone

Salvatore Tassone

Prototyping Specialist

Prototyping and finishing both visual and functional models. Part of the Solido3D Team dedicated to ONO from October 2015 to Present.

Valentina Vaiuso

Valentina Vaiuso

Customer Relationship Manager

Supporting customers and managing B2B client relationships. Part of the Solido3D Team dedicated to ONO from October 2016 to Present.

TERMS

ONO 3D
Overview
PRICE PER SHARE
$10
DEADLINE
Nov 6, 2018
VALUATION
$30M
AMOUNT RAISED
$42,825.00
Breakdown
MIN INVESTMENT
$250.00
MAX INVESTMENT
$107,000.00
MIN NUMBER OF SHARES OFFERED
1,000
OFFERING TYPE
Equity
ASSET TYPE
SHARES OFFERED
MAX NUMBER OF SHARES OFFERED
107,000

Maximum Number of Shares Offered subject to adjustment for bonus shares

Maximum 107,000* shares of Series B Common Stock ($1,070,000)

*Maximum subject to adjustment for bonus shares. See Bonus below.

Minimum 1,000 shares of Series B Common Stock ($10,000)

Company
ONO 3D, Inc.
 

Corporate Address
1355 Market Street #488 - San Francisco, CA 94103
 

Description of Business
ONO 3D is an innovative company operating in design, development,
manufacturing of 3D portable printers supported by mobile devices
 

Type of Security Offered
Series B Common Stock (the "Shares", or the "Securities")
 
Purchase Price of Security Offered
$10.00
 

Minimum Investment Amount (per investor) 
$250.00











Perks*


For Investors

$500+ Get a founder-signed ONO T-shirt

$2,500+ Get a founder-signed ONO T-shirt + a free ONO 3D Printer with a Bottle of Resin

$5,000+ Get a founder-signed ONO T-shirt + a free ONO 3D Printer with a Bottle of Resin + 5 Printers with a Bottle of Resin each to give as gifts

$10,000+ Get a founder-signed ONO T-shirt + a free ONO 3D Printer with a Bottle of Resin + 10 Printers with a Bottle of Resin each to give as gifts


For Kickstarter Backers and Pre-Order Customers

$500+ Get 10% Bonus Shares + a founder-signed ONO T-shirt

$2,500+ Get 10% Bonus Shares + a founder-signed ONO T-shirt + a free ONO 3D Printer with a Bottle of Resin

$5,000+ Get 10% Bonus Shares + a founder-signed ONO T-shirt + a free ONO 3D Printer with a Bottle of Resin + 5 Printers with a Bottle of Resin each to give as gifts

$10,000+ Get 10% Bonus Shares + a founder-signed ONO T-shirt + a free ONO 3D Printer with a Bottle of Resin + 10 Printers with a Bottle of Resin each to give as gifts


The 10% Bonus for StartEngine Shareholders

ONO 3D, Inc. will offer 10% additional bonus shares for all investments that are committed by StartEngine Crowdfunding Inc. shareholders (with ≥ $1,000 invested in the StartEngine Reg A+ campaign) within 24 hours of this offering going live.

StartEngine shareholders who have invested $1,000+ in the StartEngine Reg A+ campaign will receive a 10% bonus on this offering within a 24-hour window of their campaign launch date.  This means you will receive a bonus for any shares you purchase.  For example, if you buy 10 shares of Series B Common Stock at $10 / share, you will receive 1 Series B Common Stock bonus share, meaning you'll own 11 shares for $100.   Fractional shares will not be distributed and share bonuses will be determined by rounding down to the nearest whole share.

This 10% Bonus is only valid for one year from the time StartEngine Crowdfunding Inc. investors receive their countersigned StartEngine Crowdfunding Inc. subscription agreement.

*Perks and bonus shares are not compounded. Shipping costs not included. All perks occur after the offering is completed.

Irregular Use of Proceeds

The company will not incur any irregular use of proceeds.

PRESS

Article Image
Phone-Screen-Driven ONO 3D Printer In Action at Maker Faire New York

The print came out great, a detailed lattice generated from their cracked-screen Android phone. The conditions at the Faire were not optimal for outdoor printing of any sort (even the FDM machines on display had hiccups with the bright sun and 90+°F temperatures).

Article Image
OLO 3D: Will the Smartphone 3D Printer Soon Make Other Pricey Machines Obsolete?

With the capacity to turn a smartphone into a 3D printer, this could signal an even far more serious explosion for the technology, far beyond what we are experiencing now.

Article Image
3D Print from Your Smartphone with $99 OLO--Check Out Raging Kickstarter Campaign, Over $832K and Rising Fast

OLO 3D believes in the maximum freedom of use and form with 3D printing.

Article Image
These are the five coolest things we saw at the 2017 Luxury Technology Show

It’s impressively intuitive. Fire up the ONO app, pick a 3D model, and pour resin into the ONO’s reservoir, and you’re well on your way.

Article Image
This OLO box will turn your smartphone into a DLP 3D printer for just $99

That’s right, our beloved smartphones, which follow us everywhere and replace an ever-increasing number of tools and devices in our day-to-day lives, are on the verge of being able to create actual, 3D printed objects.

ALL UPDATES

09.18.18

Notice of Funds Disbursement

[The following is an automated notice from the StartEngine team].

Hello!

As you might know, ONO 3D has exceeded its minimum funding goal. When a company reaches its minimum on StartEngine, it's about to begin withdrawing funds. If you invested in ONO 3D be on the lookout for an email that describes more about the disbursement process.


This campaign will continue to accept investments until its indicated closing date.


Thanks for funding the future.

-StartEngine

09.05.18

Notice of Material Change in Offering

[The following is an automated notice from the StartEngine team].

Hello! Recently, a change was made to the ONO 3D offering. Here's an excerpt describing the specifics of the change:


ONO 3D, Inc. is extending their campaign for 60 days.


When live offerings undergo changes like these on StartEngine, the SEC requires that certain investments be reconfirmed. If your investment requires reconfirmation, you will be contacted by StartEngine via email with further instructions.

09.04.18

First Users and Next Shipments Update

    After a few weeks with their printers, the Kickstarter Backers who received the first 9 printers showed some amazing results. They set up a growing Facebook group in order to share their prints, comments, and suggestions, and we have taken their detailed feedback and experiences so that we can expand and improve our user guide and instructional videos. This will help make the first experiences of new users even better! Print quality increased significantly as settings were dialed in, and with their help, we will be able to shorten that process for those who follow. You can see some of the prints below, and more in our article here: https://www.ono3d.net/first-backer-printers-success/

    We received the first funds from the StartEngine campaign, and have worked out a shipment schedule for the first larger batches of printers. We have ordered boards and are organizing the logistics now.

    By the end of September, we will be shipping the first 200 printers (at least). By mid-October, we will be able to ship out an additional 500 printers. We will continue to increase batch sizes and shipments as rapidly as possible.

    Given the timing of these shipments, we have decided to extend our StartEngine campaign. We understand the uncertainty that some of you, our potential investors, have at this time, and hope that the feedback from these initial shipments will show just how much potential ONO has to grow rapidly over the coming months and years.

08.25.18

Notice of Funds Disbursement

[The following is an automated notice from the StartEngine team].

Hello!

As you might know, ONO 3D has exceeded its minimum funding goal. When a company reaches its minimum on StartEngine, it's about to begin withdrawing funds. If you invested in ONO 3D be on the lookout for an email that describes more about the disbursement process.


This campaign will continue to accept investments until its indicated closing date.


Thanks for funding the future.

-StartEngine

08.10.18

Notice of Funds Disbursement

[The following is an automated notice from the StartEngine team].

Hello!

As you might know, ONO 3D has exceeded its minimum funding goal. When a company reaches its minimum on StartEngine, it's about to begin withdrawing funds. If you invested in ONO 3D be on the lookout for an email that describes more about the disbursement process.


This campaign will continue to accept investments until its indicated closing date.


Thanks for funding the future.

-StartEngine

07.23.18

Facebook Live Stream Today!

Happy Monday Everyone!

We will be launching our second Facebook Live stream this morning at 7:00 AM PST (10:00 AM EST and 2:00 PM GMT). This will be a large reticular structure, which will print in about 4 hours. We will be setting up for YouTube Live streams later in the week, which have a much longer maximum length and much higher resolution. You can watch the stream on our page here: https://www.facebook.com/ono3d

Behind the scenes, we are working on putting together a timeline for the first shipment of printers to our Kickstarter Backers by the end of August. 

We hope to see you at the stream!

07.21.18

ONO Printing on Facebook Live

Hello Everyone!

We’re excited to share with you that yesterday we had our first Facebook Live event where we showed the entire printing process from start to finish in front of over 7,000 viewers! You can see the videos on our Facebook page linked below. One of our Kickstarter backers also posted a 12-second time-lapse of the printing, while brightening up the video a bit, which you can see here: https://www.facebook.com/ono3d/posts/1885032348465786

We will be continuing to stream prints live on Facebook as well as on YouTube, printing models uploaded from ONO users. We will have another one early next week, and will post details here when we have a definitive time and date.

Facebook Videos Link: https://www.facebook.com/pg/ono3d/videos/

07.13.18

ONO App Available on iOS and Android

Hello to our Past, Present, and Potential Investors!

The ONO 3D App is officially available on Android and iOS. You can find them in the links below, or by searching for "ONO 3D" in the App Store or Google Play.

iOS: https://itunes.apple.com/us/app/ono-3d/id1242429090?mt=8

Android: https://play.google.com/store/apps/details?id=net.ono3d.app

Download the App and start engaging with the ONO Experience. Browse publicly uploaded models in the “Explore” section. View and manage saved and uploaded models in your personal, private “MyONO.” You can upload models via the companion Web App found at https://web.ono3d.net.

You can even simulate a print by following the instructions located at https://www.ono3d.net/support. You can use the Printer QR code to pair a virtual printer to your phone. Once you start a print, you can use the Resin QR code to simulate the process of preparing the model and printing it.

07.12.18

Notice of Material Change in Offering

[The following is an automated notice from the StartEngine team].

Hello! Recently, a change was made to the ONO 3D offering. Here's an excerpt describing the specifics of the change:


In our continued wish for more transparency, we wanted to provide more information to everyone on our past and future investments, which you can find below. We have updated the offering document with a more detailed breakdown of our use of proceeds from the Kickstarter campaign, as well as our goals for shipping printers. We also wanted to go more in depth with the causes and solution to our electronics issues (for those who have not heard our explanations before) that have led to frustratingly long delays for us, but especially for our Kickstarter Backers. We also wanted to take this opportunity to thank our 38 investors to date, and those who have been supporting us both in the past 2 days, as well as in the past two years.


When live offerings undergo changes like these on StartEngine, the SEC requires that certain investments be reconfirmed. If your investment requires reconfirmation, you will be contacted by StartEngine via email with further instructions.

JOIN THE DISCUSSION













0/2500

HOW INVESTING WORKS

Cancel anytime before 48 hours before a rolling close or the offering end date.

WHY STARTENGINE?

REWARDS

We want you to succeed and get the most out of your money by offering rewards and memberships!

SECURE

Your info is your info. We take pride in keeping it that way!

DIVERSE INVESTMENTS

Invest in over 200 start-ups and collectibles!

With Regulation A+, a non-accredited investor can only invest a maximum of 10% of their annual income or 10% of their net worth per year, whichever is greater. There are no restrictions for accredited investors.

With Regulation Crowdfunding, non-accredited investors with an annual income or net worth less than $124,000, are limited to invest a maximum of 5% of the greater of those two amounts. For those with an annual income and net worth greater than $124,000, he/she is limited to investing 10% of the greater of the two amounts.

At the close of an offering, all investors whose funds have “cleared” by this time will be included in the disbursement. At this time, each investor will receive an email from StartEngine with their Countersigned Subscription Agreement, which will serve as their proof of purchase moving forward.

Please keep in mind that a company can conduct a series of “closes” or withdrawals of funds throughout the duration of the campaign. If you are included in that withdrawal period, you will be emailed your countersigned subscription agreement and proof of purchase immediately following that withdrawal.

StartEngine assists companies in raising capital, and once the offering is closed, we are no longer involved with whether the company chooses to list shares on a secondary market, or what occurs thereafter. Therefore, StartEngine has no control or insight into your investment after the close of the live offering. In addition, we are not permitted to provide financial advice. You may want to contact a financial professional to discuss possible investment outcomes.

For Regulation Crowdfunding, investors are able to cancel their investment at any point throughout the campaign up until 48 hours before the closing of the offering. Note: If the company does a rolling close, they will post an update to their current investors, giving them the opportunity to cancel during this timeframe. If you do not cancel within this 5-day timeframe, your funds will be invested in the company, and you will no longer be able to cancel the investment. If your funds show as ‘Invested’ on your account dashboard, your investment can no longer be canceled.

For Regulation A+, StartEngine allows for a four-hour cancelation period. Once the four-hour window has passed, it is up to each company to set their own cancelation policy. You may find the company’s cancelation policy in the company’s offering circular.

Once your investment is canceled, there is a 10-day clearing period (from the date your investment was submitted). After your funds have cleared the bank, you will receive your refund within 10 business days.

Refunds that are made through ACH payments can take up to 10 business days to clear. Unfortunately, we are at the mercy of the bank, but we will do everything we can to get you your refund as soon as possible. However, every investment needs to go through the clearing process in order to get sent back to the account associated with the investment.

Both Title III (Regulation Crowdfunding) and Title IV (Reg A+) help entrepreneurs crowdfund capital investments from unaccredited and accredited investors. The differences between these regulations are related to the investor limitations, the differing amounts of money companies are permitted to raise, and differing disclosure and filing requirements. To learn more about Regulation Crowdfunding, click here, and for Regulation A+, click here.

RAISED
$42,825.00
INVESTORS
62
MIN INVEST
$250.00
VALUATION
$30M

@ 2022 All Rights Reserved

Apple Store Logo

Get To Know Us

Our Team

Careers

Blog

Important Message

IN MAKING AN INVESTMENT DECISION, INVESTORS MUST RELY ON THEIR OWN EXAMINATION OF THE ISSUER AND THE TERMS OF THE OFFERING, INCLUDING THE MERITS AND RISKS INVOLVED. INVESTMENTS ON STARTENGINE ARE SPECULATIVE, ILLIQUID, AND INVOLVE A HIGH DEGREE OF RISK, INCLUDING THE POSSIBLE LOSS OF YOUR ENTIRE INVESTMENT.


www.StartEngine.com is a website owned and operated by StartEngine Crowdfunding, Inc. (“StartEngine”), which is neither a registered broker-dealer, investment advisor nor funding portal.


Unless indicated otherwise with respect to a particular issuer, all securities-related activity is conducted by regulated affiliates of StartEngine: StartEngine Capital, LLC, a funding portal registered here with the US Securities and Exchange Commission (SEC) and here as a member of the Financial Industry Regulatory Authority (FINRA), or StartEngine Primary, LLC, a broker-dealer registered with the SEC and FINRA/SIPC . You can review the background of our broker-dealer and our investment professionals on FINRA’s BrokerCheck here. StartEngine Secondary is an alternative trading system regulated by the SEC and operated by StartEngine Primary, LLC, a broker dealer registered with the SEC and FINRA. StartEngine Primary, LLC is a member of SIPC and explanatory brochures are available upon request by contacting SIPC at (202) 371-8300.


Investment opportunities posted and accessible through the site are of three types:


1) Regulation A offerings (JOBS Act Title IV; known as Regulation A+), which are offered to non-accredited and accredited investors alike. These offerings are made through StartEngine Primary, LLC (unless otherwise indicated). 2) Regulation D offerings (Rule 506(c)), which are offered only to accredited investors. These offerings are made through StartEngine Primary, LLC. 3) Regulation Crowdfunding offerings (JOBS Act Title III), which are offered to non-accredited and accredited investors alike. These offerings are made through StartEngine Capital, LLC. Some of these offerings are open to the general public, however there are important differences and risks.


Any securities offered on this website have not been recommended or approved by any federal or state securities commission or regulatory authority. StartEngine and its affiliates do not provide any investment advice or recommendation and do not provide any legal or tax advice with respect to any securities. All securities listed on this site are being offered by, and all information included on this site is the responsibility of, the applicable issuer of such securities. StartEngine does not verify the adequacy, accuracy or completeness of any information. Neither StartEngine nor any of its officers, directors, agents and employees makes any warranty, express or implied, of any kind whatsoever related to the adequacy, accuracy, or completeness of any information on this site or the use of information on this site. See additional general disclosures here.


By accessing this site and any pages on this site, you agree to be bound by our Terms of use and Privacy Policy, as may be amended from time to time without notice or liability.


Canadian Investors Investment opportunities posted and accessible through the site will not be offered to Canadian resident investors. Potential investors are strongly advised to consult their legal, tax and financial advisors before investing. The securities offered on this site are not offered in jurisdictions where public solicitation for offerings is not permitted; it is solely your responsibility to comply with the laws and regulations of your country of residence.


California Investors Only – Do Not Sell My Personal Information (800-317-2200). StartEngine does not sell personal information. For all customer inquiries, please write to contact@startengine.com.


StartEngine’s Reg A+ offering is made available through StartEngine Crowdfunding, Inc. This investment is speculative, illiquid, and involves a high degree of risk, including the possible loss of your entire investment. For more information about this offering, please view StartEngine’s offering circular and risk associated with this offering.